Cable Shear Standard

1. The gap between the movable blade and the spacer is less than 0.2mm;
2.The appearance must not be scratched
3. Is punching reasonable?
4, effortless when using
5. Whether the cut surface is flat
6, the edge sharpness is appropriate;
7, the cutting edge hardness is appropriate;
8.Even thickness of cutting edge
9, reliable material;
10. The material has higher hardness and better toughness after high temperature quenching;

No. Model Shearing Instructions
1. J-40 Cut copper-aluminum cables below 300mm2, cut 1000 pairs of communication cables, and never cut rigid cables.
2. J-40 (long handle) Cut copper and aluminum cables below 300mm2 and cut 1000 pairs of communication cables. It is strictly forbidden to cut rigid cables.
3. J-50 Shear steel core aluminum stranded wire below Φ50mm (1440mm2)
4. J-52 Cut copper-aluminum cables and armored cables below Φ50mm. It is strictly forbidden to cut rigid cables.
5, J-75 cut 3 × 120mm2,? 75mm copper and aluminum cable, armored cable
6. J-95 cuts 3 × 185mm2, 90mm copper-aluminum core armored cable. It is strictly forbidden to cut rigid cables.
7, J-100 Cut 3 × 300mm2 and copper-aluminum core armored cables with a diameter below 100mm. It is strictly forbidden to cut rigid cables.
8. J-130 Cut copper-aluminum-core armored cables with a diameter below 130mm. It is strictly forbidden to cut rigid cables.
9. J-160 Cut copper-aluminum core armored cables with a diameter below 160mm. It is strictly forbidden to cut rigid cables.
10. J-13 Cut 150mm2 steel stranded wire, Φ30mm (720mm2) steel core aluminum stranded wire. It is strictly forbidden to cut copper and aluminum cables.
11. J-25 Cut 150mm2 steel stranded wire, Φ40mm (800mm2) steel core aluminum stranded wire. It is strictly forbidden to cut copper and aluminum cables.
12, J-30 cut 100mm2 steel stranded wire, Φ30mm (630mm2) steel core aluminum stranded wire, it is strictly forbidden to cut copper and aluminum cables.