Gear type cable cutter cutting instructions

Cable Shear Standard:

1. The gap between the movable blade and the spacer is less than 0.2mm;

2.The appearance must not be scratched

3. Is punching reasonable?

4. effortless when using

5. Whether the cut surface is flat

6. the edge sharpness is appropriate;

7. the cutting edge hardness is appropriate;

8. Even thickness of cutting edge

9. reliable material;

10. The material has higher hardness and better toughness after high temperature quenching;

Serial Number Model Shearing Instructions

1. J-40 Cut copper and aluminum cables below 300mm2, cut 1000 pairs of communication cables, and never cut rigid cables.

2. J-40 (long handle) Cut copper and aluminum cables below 300mm2, cut 1000 pairs of communication cables, and never cut rigid cables.

3. J-50 Shear steel core aluminum stranded wire below Φ50mm (1440mm2)

4. J-52 Cut copper-aluminum cables and armored cables below Φ50mm. It is strictly forbidden to cut rigid cables.

5. J-75 cut 3 × 120mm2,? 75mm copper and aluminum cable, armored cable

6. J-95 cuts 3 × 185mm2, 90mm copper and aluminum core armored cable. It is strictly forbidden to cut rigid cables.

7. J-100 Cut 3 × 300mm2 and copper-aluminum core armored cables with a diameter below 100mm. It is strictly forbidden to cut rigid cables.

8. J-130 Cut copper-aluminum core armored cables with a diameter below 130mm. It is strictly forbidden to cut rigid cables.

9. J-160 Cut copper-aluminum core armored cables with a diameter below 160mm. It is strictly forbidden to cut rigid cables.

10. J-13 Cut 150mm2 steel stranded wire, Φ30mm (720mm2) steel core aluminum stranded wire. It is strictly forbidden to cut copper and aluminum cables.

11. J-25 cut 150mm2 steel stranded wire, Φ40mm (800mm2) steel core aluminum stranded wire, it is strictly forbidden to cut copper and aluminum cables.

12. J-30 cut 100mm2 steel stranded wire, Φ30mm (630mm2) steel core aluminum stranded wire, it is strictly forbidden to cut copper and aluminum cables.