How to use wire cutter

The cable cutter is a special tool for cable cutting, the shape of which is interwoven with cutting blades. It is like a very large pair of scissors, which is planned by the theory of the "leverage principle" and "pressure is inversely proportional to the area".

We must grasp an ideal operating temperature scale of the cable cutter, and control the temperature of plastic processing to make it close to this temperature scale.

Secondly, the speed of the cable cutter should be adjusted moderately, because some plastics are added with strengthening agents, such as glass fiber minerals or other filling materials. The friction of these materials with respect to metal materials is often much greater than that of molten plastic, so when using cable cutters, you should pay attention to the issue of speed. This will greatly improve the efficiency of cable supervision.

In addition, it will strengthen the fibers that are more shredded. The shredded fibers contain sharp ends, which will greatly improve the wearability and reduce the scraping effect after the mineral surface slides at high speed. So the speed should not be adjusted too high.

Operation
1. When using, the shear rod should be opened, and then the power seat actively rolls freely. (Do not use over-scale. Check whether the screws are loose before operation)

2. Adjust the mouth of the cable cutter, and put the object to be cut in the mouth of the cutter. {Do not move too much while swinging the two handles. It is not advisable to open the two handles too much, otherwise they will open actively and affect normal cutting}

3. Close the power two handles to gather inward, and swing the two handles to cut.

4. In order to use the cable cutter next time, it should be wiped clean, greased on the surface, and placed in a dry place and a relatively clean place.