Manual cable cutters are widely used in the maintenance of machinery

Manual cable cutters are widely used in the maintenance of machinery and equipment required by the pharmaceutical industry and various infrastructure construction projects.

Manual cable cutter use requirements

1. Accurately master how to use manual cable cutters. The use of manual cable cutters will be an ideal temperature processing range. The temperature of plastic processing should be controlled so that it is close to this temperature range.

2. There will be a certain amount of friction when it comes to the feeding area. Of course, it is like this plastic is not heated well, and the kneading is not very uniform, which will easily cause the inner wall of the plastic barrel to compare with the surface of the screw. Great wear.

3. The speed of the manual cable cutter should be adjusted moderately, because some plastics are added with strengthening agents, such as glass fiber minerals or other filling materials. The frictional force of these substances on metal materials is often much greater than that of melted plastic, so you should pay attention to the problem of speed when using manual cable cutters. This will greatly improve the efficiency of cable supervision.

4. In addition, it will strengthen the production of more shredded fibers. The shredded fibers contain sharp ends. This will greatly increase the wear ability and reduce the scraping effect after the mineral surface slides at high speed. So the speed should not be adjusted too high