Industry News

Taizhou Naibo Machinery Co., Ltd. Home / News / Industry News / What is a cable cutter? Introduction of cable cutter

What is a cable cutter? Introduction of cable cutter

Taizhou Naibo Machinery Co., Ltd. 2021.07.20
Taizhou Naibo Machinery Co., Ltd. Industry News


The cable cutter is a cutting pliers specially used for cutting cables. The two blades are staggered and can be opened and closed. The cable cutter is large-scale scissors designed by using the "leverage principle" and "pressure is inversely proportional to the area". In order to enhance the strength and convenience of the cable cutter, the cable cutter has developed a ratchet cable cutter from the traditional manual cable cutter, and hydraulic cable cutters, electro-hydraulic cable cutters, and all-electric cable cutters have appeared one after another.
The cable cutter is a portable pneumatic tool that uses a motor as the driving force to carry out the cutting work according to the transmission mechanism driver. It is composed of a motor, a reducer, a camshaft-mechanical structure, a power switch, a non-reconnectable plug a CNC blade, etc.

Application principle of cable cutter:

According to the camshaft-mechanical structure of the reducer driver, the motor makes the boring tool push the upper blade to perform repeated motion tree techniques, and the lower blade is fixed and does not move on the tool table. The power plug is a double-core sheathed flexible cable, which is composed of a single-post vulcanized rubber plug and cannot be reconnected.

Detailed explanation of the use principle and operation process of the cable cutter No. 1 Detailed explanation of the use principle and operation procedure of the cable cutter Knowledge of hardware tools

Cable cutter operation steps:

1. Charge the battery for 5 hours, if it is a battery charge, it must be 12 hours.

2. Before applying the special tool, unplug the charging head and disconnect the connection between the special tool and the charging head. It is not easy to work when the special tool is connected to the electric head.

3. Then remove the edge guard.

4. Turn on the switch power manually.

5. Before gradual cutting, let the cutting edge run at full load for a few seconds, and listen to whether the sound is noisy, too slow, or too fast.