What are the main classifications of cable cutters

The cable cutter is a cutting pliers specially used for cutting cables. The two blades are staggered and can be opened and closed. The cable cutter is a large knife, which is designed using the "macromolecular principle" and the "inverse ratio of pressure and large shear". In order to strengthen the strength and convenience of the cable cutter, the cable cutter has developed a ratchet cable cutter from the traditional manual cable cutter, and hydraulic cable cutters, electro-hydraulic cable cutters, and all-electric cable cutters have appeared one after another.
Manual cable cutter Manual cable cutter is similar to ordinary scissors, with basic shape, hand-held handle (time axis), and deeper knife edge.

Manual cable cutter The manual cable cutter is similar to ordinary scissors, with a larger shape, longer handle (leverage principle), and a harder blade. Manual cable cutters can easily cut small cables, but large cables require a lot of manual force.

Ratchet scissors include a handle, a shearing device and a propulsion. The propulsion device of the shearing and shearing device is driven by two drive transmissions. The card on the moving knife body of the driving device is pushed forward, so that the knife body and the fixed knife body are positioned at the front. The circular part is formed gradually to achieve the effect of the cutting part. The direction of the tangent line is moved to the direction of the movable knife body. It is desired to be like some clamping teeth of the movable knife body, so that the driving force is dispersed on the clamping teeth, so that the clamping The teeth are not easily damaged to extend their service life.

The cable cutter includes a part, which has the characteristics of machining with a card slot, a chain ring groove, a movable knife guide groove, a static knife, a guide groove, a clamp in the slot, a hydraulic cylinder with suction, and the cylinder body of the hydraulic cylinder has a column movable knife. The left through the plate is connected to the right end of the plug, and then the hydraulic cylinder body is inserted into the slot of the screen through its playback, the moving knife in the dynamic dynamic card of the moving knife points to the slot, and the static knife is used when putting the knife into the inner shear In the guide groove, the chain link is inserted into the groove of the moving ring, and then a cylinder pressure is re-injected into the high-pressure liquid. Under the action of the action, the high-pressure fluid is injected, and the plug pushes the knife to move and cooperates with the static knife to form a shear force The chain is cut.